manualshive.com logo in svg

Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 264 / 364

Share
Download
Panasonic HYBRID IP-PBX KX-TDA100 Feature Manual Download Page 264

1.13 P

264

Feature Manual

[Example of CS Channels Used for PS Ring Group Calls and ICD Group Calls]

Explanation:

The PS ring group has four (for KX-TDA50) or six (for KX-TDA100/KX-TDA200/KX-TDA600) members 
which are in range of two different CSs. When a call arrives, each CS uses one channel to ring all member 
PSs within its range.

The ICD group has one proprietary telephone (PT) member, as well as four (for KX-TDA50) or six (for KX-
TDA100/KX-TDA200/KX-TDA600) PS members which are in range of two different CSs. When a call 
arrives, each CS uses both (for KX-TDA50) or all three (for KX-TDA100/KX-TDA200/KX-TDA600) of its 
channels to ring each of the member PSs within its range.

Conditions

•

A maximum of 32 PS ring groups can be programmed.

Calls can be distributed to member extensions using different 
methods

The CS is less likely to be busy; ringing all member PSs uses only 
one CS channel

Members can log-in, log-out, and use Wrap-up time, ICD Group 
button

Both PTs and PSs can belong to the same group

Each member can belong to more than one group

Calls can wait in a queue if they cannot be answered

Features

PS Ring Group

ICD Group

PS Ring Group

Member

PS Ring Group

Member

PS Ring Group

Member

ICD Group

Member

ICD Group

Member

ICD Group

Member

PS Ring Group

Member

PS Ring Group

Member

PS Ring Group

Member

ICD Group

Member

ICD Group

Member

ICD Group

Member

Incoming call

Incoming call

ICD Group

Member

ICD Group

PS Ring Group

Summary of Contents for HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Reviews:

No comments