Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 162 / 364

1.9 I
162 Feature Manual
• DISA * If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
• Disable: Busy tone is sent to the caller.
• Operator: The call will be redirected to the
operator.
• AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
→
2.11.3 [5-3-1] Voice Message—DISA System—
Option 1—DISA Intercept—Intercept when all DISA
ports are busy (MPR Software File Version 3.1000 or
later)
• PS Ring Group **
• External Pager (TAFAS) **
• Analog/ISDN Remote Maintenance
• Other PBX Extension (TIE with no PBX Code)
Not assignable (Intercept Routing is not available.)
* Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA)
ports are busy. If Intercept Routing is activated after a call from DISA reaches the destination
extension, the Intercept Routing settings assigned to that extension will be applied.
** By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and
assigning Intercept Routing destinations to the Virtual PS, calls to these destinations will be redirected
to the Intercept Routing destination of the Virtual PS.
When the original destination is: The Available Intercept Destination is:
FWD Destination
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
2001 600
... ...
"600" is an example of a
Floating Extension No.
for the External Pager
Intercept Destination
<Intercept Destination of Virtual PS>
...
...
...
2001 1001 1001 1001 1001
Day Lunch Break Night
... ... ... ... ...
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Programming Example