Panasonic DP-8032, Service Manual

Page: 207 / 397

207
DP-8032/8025
2008 Ver. 1.2
Note 1: Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station".
The last Program Key will be assigned with the "Store 4 Poll" Key name automatically
and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen
and then press the Program Key to store or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 4: The default setting of parameters depends on the country’s specifications or regulations. Print the
Function Parameter List to confirm the default settings.
115 Time Zone 1 = Scroll
2 = Direct Selects the setting method for Time Zone.
Scroll : Allows using "Scroll Keys" to scroll
through the Time Zone Table.
Direct : Allows you to input the Time Zone directly,
(*) key to be used as a switch b/-
.
116 Overwrite
Warning
1 = Yes
2 = No Selects whether the Overwrite Warning is included
on the Internet FAX Result Receipt when
programming the Auto Dialer via email.
117
~
121
Not Used
122 LDAP 1 = Off
2 = On When LDAP is used, specialize characters may be
displayed as different characters.
123
~
174
Not Used
175 FAX/EMAIL
Default
0 = Address Book
1 = Mode Set Selects the FAX/EMAIL Default.
176
~
199
Not Used
Signal
Setting
128 256 512 1024 2048 Off
MCF/PIP 0-31 0-63 0-127 0-255 0-511 Always
RTP/PIP 32-63 64-127 128-255 256-511 512-1023 -
RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 -
Signal
Setting
5% 10% 15% 20%
MCF/PIP 0-2 0-4 0-7 0-9
RTP/PIP 3-4 5-9 8-14 10-19
RTN/PIN 5- 10- 15- 20-
Function Parameter Table
No. Parameter Selections Function