278
DP-8032/8025
2008
Ver.1.2
8.6.
Installing the Accounting Software (DA-WA10)
8.6.1.
Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting with the installation.
Remove all Tapes, and the packing materials used to secure the Units during shipment.
After unpacking the product, dispose of the packing materials appropriately
.
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
8.6.2.
Installation
1. Before installing this option, make sure the Hard Disk Drive Unit (DA-HD31) is installed into
the machine first. Refer to the Installation Instructions for the Hard Disk Drive Unit (DA-HD31).
2. Install the Accounting Software into the PC with the Operating Instructions by following the prompts of
the Installation Wizard.
3. Set the Key/Dept. Counter function by following the steps below.
1) Press the
“FUNCTION”
,
“ORIGINAL SIZE (LEDGER/A3)”
, and the
“3”
keys simultaneously.
2) Input the password, and select the
“OK”
button to enter the Service Mode (default password is
00000000
).
3) Press the
“5”
key, and press the
“START”
key to enter the F5 Service Mode. (Function
Parameters).
4) Select
“42 KEY/DEPT Counter”
.
5) Select
“DEPT.”
, and the
“OK”
button to activate the Key/Dept. Counter function.
6) Select the
“STOP”
key.
7) Press the
“Function”
, and the
“C (CLEAR)”
keys simultaneously to exit the Service Mode.
4. Set the Key/Dept. Code, please refer to the Operating Instructions (For Copy & Network Scan
Functions) to Function setting.
No.
Qty.
Description
Remarks
1
1
Accounting Software CD
Includes Operating Instructions
2
1
Installation Instructions
This document
1
2
Summary of Contents for DP-8032
