Panasonic BL-WV10, Operating Instructions Manual

Page: 59 / 164

4 Recording Images
59
4.2 Standard Recording
During standard recording, images are recorded at the displayed resolution (see
page 117).
1.
Insert an SD memory card into the BL-WV10 (see page 55).
2.
While monitoring a single camera, press REC .
• Recording begins.
• Press DISPLAY while recording to display information on the recording
(see page 121).
3.
To stop recording, press STOP .
• A list of all movies can be viewed on the [Movies] screen (see page 72).
Note
• Neither remove an SD memory card nor turn off the BL-WV10 while it is
in ordinary recording mode. Doing so will cancel the recording and may
corrupt the data on the card. If this occurs, you will need to reformat the
card with the BL-WV10 (see page 106).
• During standard recording, a maximum of 12 frames per second (fps) can
be recorded. Results will vary depending on network conditions.
CAM1
Recording
Shown in upper-right corner
of screen for 4 seconds after
recording has started
Status indicator: Red
BL-WV10_OI.book Page 59 Thursday, January 26, 2006 8:03 PM