Panasonic BL-WV10 Operating Instructions Manual Download Page 16

Page: 16 / 164

Names and Locations

Navigator keys: Used to select on-screen items or aim the camera in a
different direction.

10.

ENTER

: Depending on the current screen, selects the highlighted setting or

item, saves the current setting, or aims the camera at the home position (see
page 41).

11.

RETURN

: Returns to the previous or menu.

12.

ALERT

: Turns the alarm on and off. The alarm can be used to alert you to

camera sensor detection.

13.

REC

: Press while monitoring a camera to record a movie.

14.

SNAPSHOT

: Press while monitoring a camera to take a picture.

Insert the batteries

Active range

The remote control can be used up to 7 m away and within a 30 degree angle from
the remote control sensor.

While pulling the cover
toward you, lift it up.

Insert the batteries,
orienting the + and -
poles as indicated.

Align the cover and
press down until it
snaps into place.

30˚

Signal
transmitter

Remote control sensor

BL-WV10_OI.book Page 16 Thursday, January 26, 2006 8:03 PM

Summary of Contents for BL-WV10





































































































































































Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands

Panasonic BL-WV10, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands