Panasonic BL-WV10 Operating Instructions Manual Download Page 127

Page: 127 / 164

Adding Cameras

127

•

When registration is complete, the alarm will sound and the wireless
indicator will flash once for each of the cameras registered.

•

The Quick Setup screen will appear differently based on the network on
which it is used.

•

The camera can also be registered manually (see page 89). However, any
additional cameras will be registered as remote cameras.

•

To add more cameras, connect the Ethernet cable to the camera to be
added, and re-perform step 2.

Once all of the cameras have been registered as in step 2, set the mode
switch on the back on the BL-WV10 to

NORMAL

, turn the BL-WV10 off and

then turn it back on again.

Confirm the camera images.

•

Place the cameras after confirming that they display images correctly.

When camera
registration is
complete,
[Finished] is
displayed.

BL-WV10_OI.book Page 127 Thursday, January 26, 2006 8:03 PM

Summary of Contents for BL-WV10





































































































































































Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands

Panasonic BL-WV10, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands