Panasonic BL-WV10, Operating Instructions Manual

Page: 23 / 164

2 Setup
23
6.
Connect an Ethernet cable to one of the LAN jacks on the router and to one
of the LAN jacks on the BL-WV10.
7.
Connect the router to the power outlet and turn it on.
You are now ready to use the BL-WV10's Easy Network Setup utility to configure
the BL-WV10.
2.4.2 Easy Network Setup (When Using a Router)
After the BL-WV10 starts up for the first time, the [Easy Network Setup] screen is
displayed. Here you can set the administrator user name and password, and select
whether access from the Internet is configured automatically or manually.
1.
Confirm that the [Easy Network Setup] screen is displayed.
2.
Use the navigator keys to select [User Name], then press ENTER .
3.
Enter the administrator user name (6 or more characters and/or digits), then
press
STOP to save the setting.
• For instructions on entering characters, see page 114.
4.
Select [Password], then press ENTER .
5.
Enter an administrator password (6 or more characters and/or digits), then
press
STOP to save the setting.
6.
Select [Mobile Access], then press ENTER .
7.
Select [Auto] or [Manual] as desired, then press ENTER .
• Select [Auto] only if you will connect the BL-WV10 to a router that supports
UPnP
TM . Refer to the operating instructions included with your router for
more information.
• See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for information on
UPnP
TM routers that Panasonic has verified as being compatible with this
product.
BL-WV10_OI.book Page 23 Thursday, January 26, 2006 8:03 PM