Panasonic BL-WV10 Operating Instructions Manual Download Page 17

Page: 17 / 164

Names and Locations

Note

•

Do not place anything between the remote control sensor and the remote
control.

•

Do not expose the remote control sensor to direct sunlight or powerful
inverter-type fluorescent light.

•

If dust or grime accumulates on the remote control sensor and/or the remote
control transmitter, the effective range will be shortened.

•

To clean, wipe the remote control sensor and transmitter with a clean dry cloth.

•

If the BL-WV10 is placed in a cabinet, the thickness and/or color of the glass
doors of the cabinet may decrease the effective range of the remote control.

•

The effective range of the remote control may decrease when the batteries are
losing their charge.

BL-WV10_OI.book Page 17 Thursday, January 26, 2006 8:03 PM

Summary of Contents for BL-WV10





































































































































































Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands

Panasonic BL-WV10, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands