Panasonic BL-WV10, Operating Instructions Manual

Page: 80 / 164

6 Setup Menu
80
6.1 Date and Time
The BL-WV10 receives date and time information from registered and connected
cameras each time it starts up. In addition, the internal clock can sometimes speed
up or slow down based on environment temperatures. If the time displayed is off,
the date and time can be set manually.
1.
Select [Date and Time] from the [Setup] screen (see page 79) and press
ENTER .
• The Clock Settings screen appears.
2.
Use the left and right navigator keys to select the desired information, then
press the up or down navigator keys to change the setting and press
ENTER .
• When you set the time manually, the clocks of all connected local cameras
will be synchronized to match.
Note
• The BL-WV10 will be unable to receive time data if no cameras are connected
when it starts up. In that instance, set the clock manually.
• If [DST] is turned on, the BL-WV10 will automatically adjust its clock for Daylight
Saving Time. You can select the start and end days for Daylight Saving Time
on this screen.
When Connected to a Router
• Time data can be obtained from remote cameras, but that data will not
overwrite settings in the BL-WV10. The time displayed while monitoring and the
time used for recording purposes is taken from the BL-WV10's clock. If the time
in a remote camera is incorrect, connect to it with a computer and reset its clock
to match that of the BL-WV10.
BL-WV10_OI.book Page 80 Thursday, January 26, 2006 8:03 PM