Panasonic BL-WV10, Operating Instructions Manual

Page: 67 / 164

4 Recording Images
67
Note
• If the power fails or is turned off during a continuous sensor recording, you
may see an error result. If that occurs, erase the timer recording settings
(see page 68).
• During continuous sensor recording, when sensor activation is used to
record images, the sensor indicator will begin flashing once the camera’s
sensor is activated. To stop the flashing, see page 53.
• The sensor range may differ depending on the camera type. See the
camera user guide for cautions in placing the camera to maximize that
range.
4.4.3 Changing the Record Mode
The image mode can be changed for timer and continuous sensor recording.
1.
In the [Recorder] screen, select [Record Mode] and press ENTER .
• The Record Mode screen appears.
2.
Using the left and right navigator keys, select the desired mode and press
ENTER .
Note
• A guide for the capacity of a 64MB SD memory card for each recording
mode is indicated below (for more information see page 57). If the
resolution is set to LOW, the recorded image will appear smaller, as will its
image during recording.
Record
Mode
Resolution Image
Quality
Image Refresh
Interval
Record Time (when
recording to a 64 MB
SD memory card)
HIGH 640 x 480 Standard 1 frame/sec. About 30 min.
LOW 320 x 240 Favor Motion 1 frame/sec. About 2 hr.
LONG 320 x 240 Favor Motion 1 frame/5 sec. About 10 hr.
BL-WV10_OI.book Page 67 Thursday, January 26, 2006 8:03 PM