Panasonic BL-WV10 Operating Instructions Manual Download Page 72

Page: 72 / 164

Viewing Movies and Pictures

Viewing Movies and Pictures

5.1

Playing Movies

There are 2 ways to play recorded movies: press

PLAY/PAUSE

on the remote

control or select the movie in the image list.

Pressing the PLAY Key

Insert an SD memory card containing movies into the BL-WV10.

When the Monitoring Screen is visible, press

PLAY/PAUSE

•

The movie selected in the movie list will play.

•

Press

DISPLAY

while the movie is playing to display information (see

page 74).

Selecting the Movie

Insert an SD memory card containing movies into the BL-WV10.

Press

MENU

•

The menu is displayed.

Select [Images] and press

ENTER

Select [Movies] and press

ENTER

•

The movies screen appears.

Select the movie and press

ENTER

•

The movie will play.

The recording capacity for the currently selected recording
mode for the SD memory card is displayed.

Operation hints

Select to view the next page

Select to view the previous page

Current page/Total number of pages

Current date and time

Movie list
Camera name and record
date/time is displayed
under each movie

BL-WV10_OI.book Page 72 Thursday, January 26, 2006 8:03 PM

Summary of Contents for BL-WV10





































































































































































Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands

Panasonic BL-WV10, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands