– 109 –
Chapter 4 Shooting — Viewfinder status display
[ ]
Displayed when the rec during upload function is enabled.
The display will blink when recording is started immediately after the power is turned on or the P2 card is inserted, and the
upload will not be executed until the recording is stopped.
[ ]
Displayed during upload.
[ ]
Displayed from when transfer error occurred during upload until when the next upload starts.
45 Recording operation status display
[REC]
Displayed when set [CHAR] in the main menu
→
[REC/PB]
→
[REC/PB SETUP]
→
[REC TALLY]. This is also displayed when
set [ON] in the main menu
→
[VF]
→
[VF INDICATOR]
→
[REC STATUS].
46 Streaming distribution status display
Displays the streaming status.
[ ] (flashing)
Flashes while the camera is being connected to a device which will receive the streaming video.
[ ](illuminated)
Displayed when the camera is connected to a device receiving the streaming video and the camera is transmitting streaming
video.
The display turns off when a connection could not be established properly.
@
@
NOTE
t
Depending on the network status, the [ ] display may not be able to follow during actual operation.
47 Recording format
Displays the recording method.
[AVC-I200], [AVC-I100], [AVC-I50], [AVC-G50], [AVC-G25], [AVC-G12], [DVCPRO HD], [DVCPRO50], [DVCPRO], [DV]
48 System mode
Displays the mode in which the camera is operating.
[1080-59.94P]
1080/59.94 progressive mode
[1080-59.94i]
1080/59.94 interlaced mode
[1080-50P]
1080/50 progressive mode
[1080-50i]
1080/50 interlaced mode
[1080-23.98PsF]
1080/23.98PsF progressive/segment frame mode
[720-59.94P]
720/59.94 progressive mode
[720-50P]
720/50 progressive mode
[480-59.94i]
480/59.94 interlaced mode
[576-50i]
576/50 interlaced mode
Checking and displaying shooting status
Each of the display items can be set to display/hide in the setting menu. All display items can be hidden at a time. Also, the mode check [STATUS]
screen is displayed when the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch is pushed towards the <MCK/MCL> side. During mode check,
almost all items are displayed including usually hidden items so that the shooting status can be checked. For details on the mode check, refer to “Mode
check display” (page 111).
No
Display item name
Selection of menu item display/
hide
Display status
Display batch
off*
1
Mode check
display
Display in
playback mode
At all times
Relevant
menu items
only
1
Shutter speed/mode
[VF INDICATOR]
→
[SHUTTER]
l
—
l
l
l
—
2
Camera mode
[VF INDICATOR]
→
[CAMERA MODE]
l
l
—
l
l
—
3
HD SDI recording control
information
[VF INDICATOR]
→
[SDI
REC STAT]
l
—
l
—
l
—
4
Proxy information display
[VF INDICATOR]
→
[PROXY DISP]
or
[DUAL CODEC SETUP]
→
[PROXY DISP]
l
—
l
l
*
3
l
—
5
SD memory card status
display
[VF INDICATOR]
→
[PROXY DISP]
or
[DUAL CODEC SETUP]
→
[PROXY DISP]
l
—
l
l
*
3
l
—
6
External GPS status
display
[VF INDICATOR]
→
[EXTERNAL GPS]
l
—
l
l
l
—
7
Bonding device status
display
[VF INDICATOR]
→
[BONDING DEV.]
l
—
l
l
l
—
4G/LTE connection status
display
[VF INDICATOR]
→
[4G/
LTE]
l
—
l
—
l
—
8
Camera warning,
notification display area
[VF DISPLAY]
→
[DISP
MODE]
l
*
4
—
l
—
l
—
