Panasonic AJ-PX5100G Page 252 Operating Instructions Manual Download

Page: 252 / 263

– 252 –

Chapter 9 Maintenance — Warning system

Storage

Message

Description

Measure

[CANNOT ACCESS CARD!]

An error occurred while accessing the P2 card.

Check the P2 card.

[CANNOT ACCESS TARGET!]

An error occurred while accessing the connection target.

Check the storage device status and connection.

[CANNOT COPY!][FORMAT

STORAGE DEVICE TO FAT]

The partition that can copy clips does not exist on the storage

device.

Reformat in FAT format, or export the P2 card to create a

partition.

[CANNOT FORMAT!]

The storage device cannot be formatted.

Change the connected storage device.

[CANNOT RECOGNIZE

STORAGE DEVICE!]

The storage device is not correctly recognized.

Reboot the storage device or connect another storage device.

[CANNOT SELECT!][MAX. 6

PARTITIONS]

Storage devices with more than 6 partitions cannot be

selected (mounted simultaneously).

Release selected partitions.

[CARD IS EMPTY! CANNOT

COPY!]

The P2 card to copy is empty.

The copy operation is not performed because the card is

empty.

[FORMAT P2 CARD!]

Cannot import to a P2 card containing clips.

Format the P2 card.

[LACK OF CAPACITY!]

Not enough space left on the storage device.

Use a new storage device with sufficient available space or a

formatted storage device.

[MISMATCH COMPONENT!]

The P2 card model number of the copy source and copy

destination do not match. Cannot copy.

Use the P2 cards of the same model number, or import on a

clip basis.

[STORAGE DEVICE

DISCONNECTED!]

The connection with the storage device is disconnected.

Reconnect the USB cable to the <USB3.0> terminal (host).

When it does not function normally after that, turn off the

power once and turn on the power again.

[TOO MANY PARTITIONS!]

There are too many partitions.

The maximum number of partitions on the storage device is

23. Either reformat, or use a new storage device.

[UNKNOWN DEVICE

CONNECTED!]

A non-compatible DVD drive or other device is connected.

Change the connected device to the correct storage device,

and then turn the power off once and turn it on again.

[VERIFICATION FAILED!]

The compare check performed after copying failed.

Copy it again.

Summary of Contents for AJ-PX5100G








































































































































































































































































Search results

Summary of Contents for AJ-PX5100G

Reviews:

Related manuals for AJ-PX5100G

Brands by name

Popular brands

Panasonic AJ-PX5100G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5100G

Reviews:

Related manuals for AJ-PX5100G

Brands by name

Popular brands