– 186 –
Chapter 6 Menu Operations — Menu list
Item
Description of settings
[AUTO LVL CH4(CH2)]
Selects whether to automatically adjust the level adjustment method for audio CH4 (CH2).
[ON]:
Automatic adjustment is enabled.
[OFF]:
Automatic adjustment is disabled. Can be adjusted using [LVL CONTROL CH4(CH2)] at this time.
f
Factory setting: [ON]
The channel is replaced when [CH3/4] is selected in [VR SELECT]. Setting values are inherited between
replaced channels.
[LVL CONTROL CH3(CH1)]
Can be manually adjusted with this item when automatic level adjustment of audio CH3 (CH1) is [OFF].
[0]…[100]
f
Factory setting: [70]
The channel is replaced when [CH3/4] is selected in [VR SELECT]. Setting values are inherited between
replaced channels.
[LVL CONTROL CH4(CH2)]
Can be manually adjusted with this item when automatic level adjustment of audio CH4 (CH2) is [OFF].
[0]…[100]
f
Factory setting: [70]
The channel is replaced when [CH3/4] is selected in [VR SELECT]. Setting values are inherited between
replaced channels.
[MIC LOWCUT CH1]
Selects the microphone lowcut filter for input channel 1.
[FRONT]:
Works when the front microphone is selected.
[W.L.]:
Enabled only when wireless microphone receiver is selected.
[REAR]:
Enabled only when the rear microphone is selected.
[OFF]:
The microphone lowcut filter does not work for any input.
f
Factory setting: [OFF]
[MIC LOWCUT CH2]
Selects the microphone lowcut filter for input channel 2.
[FRONT]:
Works when the front microphone is selected.
[W.L.]:
Enabled only when wireless microphone receiver is selected.
[REAR]:
Enabled only when the rear microphone is selected.
[OFF]:
The microphone lowcut filter does not work for any input.
f
Factory setting: [OFF]
[MIC LOWCUT CH3]
Selects the microphone lowcut filter for input channel 3.
[FRONT]:
Works when the front microphone is selected.
[W.L.]:
Enabled only when wireless microphone receiver is selected.
[REAR]:
Enabled only when the rear microphone is selected.
[OFF]:
The microphone lowcut filter does not work for any input.
f
Factory setting: [OFF]
[MIC LOWCUT CH4]
Selects the microphone lowcut filter for input channel 4.
[FRONT]:
Works when the front microphone is selected.
[W.L.]:
Enabled only when wireless microphone receiver is selected.
[REAR]:
Enabled only when the rear microphone is selected.
[OFF]:
The microphone lowcut filter does not work for any input.
f
Factory setting: [OFF]
[LIMITER CH1]
Selects the channel 1 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
f
Factory setting: [OFF]
[LIMITER CH2]
Selects the channel 2 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
f
Factory setting: [OFF]
[LIMITER CH3]
Selects the channel 3 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
f
Factory setting: [OFF]
[LIMITER CH4]
Selects the channel 4 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
f
Factory setting: [OFF]
[TEST TONE]
Selects test signals.
[NORMAL]:
Outputs test tones to all channels if the <OUTPUT> switch is <BARS>, and <CH1> on the
<AUDIO IN> switch is set to <FRONT>.
[ALWAYS]:
Outputs test tones to all channels at all times when the <OUTPUT> switch is <BARS>.
[CHSEL]:
When the <OUTPUT> switch is <BARS>, outputs test tones to the channel for which <CH1> or
<CH2> on the <AUDIO IN> switch is set to <FRONT>. The test tones are not output to CH3 and CH4.
[OFF]:
Does not output the test tone.
f
Factory setting: [NORMAL]
[FRONT MIC POWER]
Sets the phantom power of the front microphone.
[ON], [OFF]
f
Factory setting: [ON]
[REAR MIC POWER]
Sets the phantom power of the rear microphone.
Phantom power is not output when [OFF] is selected, even if the <REAR AUDIO CH1> and <REAR AUDIO
CH2> switches are set to <
+
48V>.
[ON], [OFF]
f
Factory setting: [ON]
[MONITOR SELECT]
Selects the signal method to output to the monitor when the <MONITOR SELECT> switch is set to <ST>
(stereo).
[STEREO], [MIX]
f
Factory setting: [STEREO]