– 188 –
Chapter 6 Menu Operations — Menu list
Item
Description of settings
[FTP CLIENT SERVICE] [SETTING DATA]
Sets the source from where client service settings are acquired.
[INTERNAL]:
Uses the settings set on the camera.
[SD CARD]:
Uses the settings of the file inside the SD memory card inserted in the SD card slot.
When this item is set to [SD CARD], insert an SD memory card before turning on the power of the camera.
f
Factory setting: [INTERNAL]
f
[SERVER URL]
Sets the name or address of the destination server.
f
[LOGIN USER]
Sets the login user ID.
f
[LOGIN PASSWORD]
Sets the login password.
f
[SSH]
Sets when transferring files using SSH.
[ENABLE]:
Uses SSH.
[DISABLE]:
Does not use SSH.
f
Factory setting: [DISABLE]
f
[SSH PORT]
Sets the network port number when SSH is used. Set to the same number as the server. The menu setting
value is displayed with [
*
].
f
Factory setting: [22]
f
[LOAD (SD CARD)]
Loads the settings of the client service from the SD memory card.
f
[SAVE (SD CARD)]
Saves the settings of the client service onto the SD memory card.
[REC DURING
UPLOAD]
Sets whether to use the rec during upload function.
[ENABLE]:
Uses the rec during upload function.
[DISABLE]:
Does not use the rec during upload function.
f
Factory setting: [DISABLE]
[AUTO UPLOAD]
Sets whether to enable the function to register clips recorded using the camera automatically to the upload
list when recording stops, and if enabled, sets the type of target clip.
[REC CLIP(PROXY)]:
Upload target is proxy data of recorded clips.
[REC CLIP]:
Upload target is recorded clips (main recording data and proxy data).
[DISABLE]:
Recorded clips are not upload targets.
f
Factory setting: [DISABLE]
[UPLOAD LIST]
Displays the list information of clips to upload.
[SAVE LOG (SD CARD)] Save up to the latest 1000 logs for clip information (month and date, clip number (global clip ID), status)
registered in the upload list to an SD memory card.
[STREAMING SETTING] [START TRIGGER]
Sets the method for starting video streaming.
[CAMERA]:
Starts/stops streaming from the camera.
[RECEIVER]:
Operates the start/stop of the streaming distribution from the terminal on the network using
the P2 Browser or the P2 Streaming Receiver.
f
Factory setting: [RECEIVER]
[SETTING DATA]
Sets the source from where settings for streaming is acquired when [CAMERA] is selected in [START
TRIGGER].
[INTERNAL]:
Uses the settings set on the camera.
[SD CARD]:
Uses the settings of the file inside the SD memory card inserted in the SD card slot.
When this item is set to [SD CARD], insert an SD memory card before turning on the power of the
camera.
f
Factory setting: [INTERNAL]
[SERVER ADDR.]
Sets the IP address of the device receiving the streaming video when [CAMERA] is selected in [START
TRIGGER].
[RTSP PORT]
Sets the RTSP port number required for streaming when [CAMERA] is selected in [START TRIGGER].
f
Factory setting: [554]
[LOAD (SD CARD)]
When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the
connection information necessary for streaming distribution is read from the SD memory card.
[SAVE (SD CARD)]
When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the
connection information necessary for streaming distribution is saved to the SD memory card.
[START]
When [CAMERA] is selected in [START TRIGGER], the streaming distribution is started/stopped from the
camera.
[ON]:
Starts streaming.
[OFF]:
Stops streaming.
[LAN PROPERTY]
[MAC ADDRESS]
Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)
[DHCP]
Sets whether to use automatic acquisition via DHCP.
(Mutually exclusive with [DHCP SERVER] setting)
[ENABLE]:
Uses automatic acquisition.
[DISABLE]:
Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f
Factory setting: [ENABLE]
[IP ADDRESS]
Sets the IP address when [DISABLE] is selected in [DHCP].
f
Factory setting: [192.168.0.1]
[SUBNET MASK]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f
Factory setting: [255.255.255.0]
[DEFAULT GATEWAY]
Sets the default gateway when [DISABLE] is selected in [DHCP].
f
Factory setting: [192.168.0.254]
[PRIMARY DNS]
Sets the primary DNS server when [DISABLE] is selected in [DHCP].
f
Factory setting: [0.0.0.0]
[SECONDARY DNS]
Sets the secondary DNS server when [DISABLE] is selected in [DHCP].
f
Factory setting: [0.0.0.0]
