– 175 –
Chapter 6 Menu Operations — Menu list
Item
Description of settings
[REMAIN SETUP]
Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.
[REMAIN]:
Displays remaining capacity.
[USED]:
Displays used capacity.
f
Factory setting: [REMAIN]
[FREE CAP. OF PARTITION]
Displays available space in a partition.
f
This is displayed while the thumbnail screen for the [TYPE S] storage device is displayed.
[REPOSITION]
Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]:
Displays all clips as thumbnails.
[SAME FORMAT CLIPS]:
Displays only the clips recorded in the same format as the system format as thumbnails.
Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT], and [AUDIO SMPL RES] in the main menu
→
[SYSTEM]
→
[SYSTEM MODE] matches the current setting status.
Example) [1080-59.94i], [AVC-I100], [24BIT]
[SELECTED CLIPS]:
Displays only the clips selected with the <SET> button as thumbnails. The thumbnails appear in selected order.
[MARKED CLIPS]:
Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO CLIPS]:
Displayed only clips with text memo data attached as thumbnails.
[SLOT CLIPS]:
Displays only the clips of the selected slot as thumbnails.
[NG CLIPS]:
Displays only the clips with the defective clip indicator as thumbnails.
f
Factory setting: [ALL CLIP]
[DELETE]
Deletes selected clips.
To interrupt the deletion process, press the <SHIFT> button
+
<EXIT> button, or the <SET> button to cancel the operation. Once a clip is deleted, it
cannot be restored even if the deletion process is aborted.
[FORMAT]
When the [FORMAT] menu is selected, format the P2 card in the specified P2 card slot and the SD memory card in the specified SD memory card slot.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or [CPS(ENCRYPT)] (encrypted format).
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[FORMAT(STORAGE)]
Formats a storage device connected to the <USB3.0> terminal (host) using the specified system in USB storage mode.
[TYPE S]:
Formats in the [TYPE S] format.
[FAT]:
Formats in the [FAT] format.
Enabled only for storage explorer, storage thumbnail.
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[COPY]
Copies the selected clip to a P2 card in any P2 card slot, a storage device, or FTP server.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD], [STORAGE], [FTP], [FTP(PROXY)]
Do not turn power off or remove the card during copying. Doing so will result in defective clips. If a defective clip is created, delete the clip before
copying it again.
Combine incomplete clips before copying.
[EXPORT]
Exports (writes) clips from the P2 card or SD memory card to a storage device or FTP server by units of card.
[ALL SLOT], [SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4]:
Exports clips from the P2 card to a storage device.
[SD CARD]:
Exports clips from the SD memory card to the FTP server.
[IMPORT]
Imports (writes back) clips etc. from a storage device or FTP server to the P2 card or SD memory card by units of card.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
Only [TYPE S] is enabled for the storage device.
Only writes back to a card with a serial number matching the original card serial number.
This item is displayed only in storage explorer or FTP explorer.
[REPAIR]
Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result of sudden power loss during recording or other reasons.
Repair may be impossible, depending on how it was damaged. When repair is impossible, a yellow indicator is displayed.
