– 24 –
Chapter 2 Description of Parts — Shooting and recording/playback functions section
Shooting and recording/playback functions section (Recording unit)
1
20
22 23
21
19
16
17
14
2 3
5
18
10 11 12 13
15
7
4
6
8
8
9
Recording is started by pressing this button. Recording is stopped by pressing this button again.
This button has the same function as the VTR button on the lens side.
2
<SHOT MARKER> button (page 78)
f
Shot marks can be added to the thumbnail of a clip while that clip is being recorded. Thumbnails can also be selected in the LCD monitor, and shot
marks can be added by pressing this button.
f
The selected function can be assigned as the <USER3> button. Set the function to be assigned in the main menu
→
[CAMERA]
→
[USER SW]
→
[SHOT MARK (U3)].
3 <TEXT MEMO> button (page 78)
f
Text memos can be recorded by pressing this button during recording/playback or while playback is paused.
f
The selected function can be assigned as the <USER4> button. Set the function to be assigned in the main menu
→
[CAMERA]
→
[USER SW]
→
[TEXT MEMO (U4)].
4 P2 memory card access LED (page 52)
Indicate the access status of recording and playback of each card.
5 P2 memory card slot
6 Busy (active status indication) lamp (page 119)
Indicate the active status of the SD memory card, and is illuminated when the card is active.
@
@
NOTE
t
Do not insert or remove the card while the lamp is lit. This might damage the SD memory card.
7 SD memory card slot (page 119)
This is the insertion slot for the SD memory card (optional). Use the SD memory card for recording/opening the setting menu and lens files for the
camera, or uploading metadata or proxy recording, etc.
@
@
NOTE
t
Cautions when using SD memory cards
- On the camera, use SD memory cards that conform to the SD standard, SDHC standard, or the SDXC standard. To record the proxy data, use
SD, SDHC, or SDXC memory cards with an indication of class2 or higher.
If the recording format of the proxy data is [SHQ 2CH MOV] or [AVC-G6 2CH MOV], use a card of class4 or higher.
- MMC (Multi Media Card) cannot be used. (Bear in mind that taking pictures may no longer be possible if you use them.)
- When using miniSD/microSD cards with the camera, always install the adaptor specially designed for miniSD/microSD cards. (The camera will
not work properly if only the miniSD/microSD adaptor is installed. Make sure that the card has been inserted into the adaptor before use.)
- Use of Panasonic SD memory cards and miniSD/microSD cards is recommended. Be sure to format cards on the camera before use.
- Refer to our support desk at the following website for the latest information not included in these operating instructions.
https://pro-av.panasonic.net/
- SDHC memory cards are a standard that was established in 2006 by the SD Association for large-capacity memory cards that exceed 2 GB.
- SDXC memory cards are a standard that was established in 2009 by the SD Association for large-capacity memory cards that exceed 32 GB.
8
microP2 memory card access LED (page 52)
Indicates the access status of recording and playback of each microP2 memory card.
