– 21 –
Chapter 2 Description of Parts — Audio (output) function section
Audio (output) function section
7
6
3
6
2
1
5
4
1 <MONITOR> (volume adjustment) dial
Adjust the volume of the speaker and earphones.
2
<ALARM> (alarm volume adjustment) dial
Adjust the volume of the alarm from the speaker and earphones.
When set to the minimum position, the alarm cannot be heard.
3 Speaker
During recording, EE audio can be monitored, and during playback, playback audio can be monitored.
The alarm is output in sync with flashing/lighting of the <WARNING> lamp or warning indicator.
Audio from the speaker automatically disappears when earphones are connected to the <PHONES> terminal.
4 Audio channel selector switch
Switch the audio channels output to the speaker, earphones, and <AUDIO OUT> terminal.
<CH1/2>
Outputs the signals of audio channels 1 and 2.
<CH3/4>
Outputs the signals of audio channels 3 and 4.
The channel display of the audio level meter on the LCD monitor and viewfinder are also switched interlocked to operation of this switch.
5 <MONITOR SELECT> (audio selection) selector switch
Select audio output from the speaker, earphones and <AUDIO OUT> terminal interlocked with the audio channel selector switch.
<CH1/3>
Outputs the signal of either audio channel 1 or audio channel 3.
<ST>
Outputs either the stereo audio signals of audio channels 1 and 2 or the stereo audio signals of audio channels 3 and 4. Stereo audio
signals can be changed to the MIX signals in the main menu
→
[I/F SETUP]
→
[MIC/AUDIO]
→
[MONITOR SELECT].
<CH2/4>
Outputs the signal of either audio channel 2 or audio channel 4.
<MONITOR SELECT> (audio selection)
selector switch
Audio channel selector switch
<CH1/2>
<CH3/4>
<CH1/3>
Audio channel 1
Audio channel 3
<ST>
Stereo output from audio channels 1 and 2*
Stereo output from audio channels 3 and 4*
<CH2/4>
Audio channel 2
Audio channel 4
* [STEREO] or [MIX] can be switched to in the main menu
→
[I/F SETUP]
→
[MIC/AUDIO]
→
[MONITOR SELECT].
6 <PHONES> (earphones) terminal (mini jack)
This is the terminal for connecting the audio monitor earphones. (stereo)
Audio that is output is the same on both terminals (front side, rear side)
7 <AUDIO OUT> terminal
f
Output audio signals recorded on audio channel 1/2 or 3/4.
f
Select output signals by the <MONITOR SELECT> selector switch.
