Panasonic AJ-PX5100G, Operating Instructions Manual

Page: 236 / 263

– 236 –
Chapter 8 Network Connection — Network function
1) Select [INTERNAL] in main menu → [I/F SETUP] → [USB/LAN] → [STREAMING SETTING] → [SETTING DATA].
2) Set each item by matching the connection destinations in main menu → [I/F SETUP] → [USB/LAN] → [STREAMING SETTING].
[SERVER ADDR.]: Sets the IP address of the connection destination.
[RTSP PORT]: Set the RTSP port number of the destination.
@ @
NOTE
t You can save the details you have set in Step
2
to an SD through the following procedure: Insert the SD memory card and select [SAVE (SD CARD)]
in main menu → [I/F SETUP] → [USB/LAN] → [STREAMING SETTING].
Configuring the settings by directly referring to the settings contained in the SD memory card
Configure the settings by directly referring to the settings contained in the SD memory card without saving it in the camera.
First, insert the SD memory card that contains the settings, then turn on the power of the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in main menu → [I/F SETUP] → [USB/LAN] → [NETWORK SEL]. For details on each connection method, refer to
“Wireless LAN settings” (page 229) and “Wired LAN settings” (page 231).
2
Configure the network settings of the camera.
Select [SD CARD] in main menu → [I/F SETUP] → [USB/LAN] → [STREAMING SETTING] → [SETTING DATA].
@ @
NOTE
t The setting value of the SD memory card can be saved in following method.
- Select [SAVE (SD CARD)] in the main menu
→ [I/F SETUP] → [USB/LAN] → [STREAMING SETTING].
Configuring the settings after saving the settings contained in the SD memory card to the camera
Configure the settings after saving the settings contained in the SD memory card to the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in main menu → [I/F SETUP] → [USB/LAN] → [NETWORK SEL]. For details on each connection method, refer to
“Wireless LAN settings” (page 229) and “Wired LAN settings” (page 231).
2
Configure the network settings of the camera.
1) Select [INTERNAL] in the main menu → [I/F SETUP] → [USB/LAN] → [STREAMING SETTING] → [SETTING DATA].
2) Insert the SD memory card which contains the settings and select [LOAD (SD CARD)] in main menu → [I/F SETUP] → [USB/LAN] →
[STREAMING SETTING].