Connecting a Power Source
Camcorder Quick Start Guide
AD68-00752S
Power Switch
1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and connect
the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the
camcorder.
4. Turn the Camera power switch to off, and the charging indica-
tor will start to flash, showing that the battery is charging.
Battery charge time
SB - LS110 :
Approx 2hr
SB - LS220 :
Approx 3hr 30min
MENU Button
MENU Selector
(MENU/VOLUME/MF)
1. Insert the Lithium battery with the positive ( ) terminal face outward.
2. Insert a Cassette.
3. Select the appropriate OSD Language among the English, French, Spanish,
Portuguese, German and Italian.
➀
Press the MENU button.
➁
Move the MENU SELECTOR to highlight INITIAL and push the MENU
SELECTOR.
➂
Using the MENU SELECTOR, select the LANGUAGE.
➃
Push the MENU SELECTOR to confirm the OSD Language.
➄
To exit, press the MENU button.
●
CLOCK SET
➀
Press the MENU button.
➁
Move the MENU SELECTOR to highlight INITIAL and push the MENU
SELECTOR.
➂
Use the MENU SELECTOR to select CLOCK SET from the submenu.
➃
Push the MENU SELECTOR to enter SETTING mode.
A blinking item indicates the item to be changed.
➄
Using the MENU SELECTOR and MENU SELECTOR, change the year, month,
day, and hour setting.
➅
The word COMPLETE! will appear, and a few seconds later, the menu screen
will automatically return to the sub menu.
1. Connect a Power source to the camcorder.
2. Remove the LENS CAP.
3. Set the mode switch to the TAPE position.
4. Set the power switch to the CAMERA position.
5. To start recording, press the START/STOP button.
Preparation
Basic Recording
1
2
3
1
3
5
4
2
THETA2-Quick Guide-(D303) 5/21/04 10:53 AM Page 1
