Panasonic AJ-D93MC, Service Manual

Page: 37 / 180

INF-24
12-2-3. Microcomputer Flash ROM Version Upgrade Procedure (2)
<SERVO Microcomputers (SERVO Board)>
1. Turn on the VTR power.
2. Copy the program software for the SERVO and SYS_IF as shown in the table 12-1 into the personal
computer.
3. Execute the VSI2312N. exe so that the following screen appears.
4. Select the CPU (Microcomputer) sheet as shown in figure 9-1C-1.
Figure 12-2C-1
5. Select the each item on the Setup Panel as shown in the table 9-1-10.
(3) Writing data Board Name
(Slot No.) (3) Microcomputer
Select
(4) Software
Select
FILE
data FILE
Extension
(4) Target
machine
ID check
SERVO Board (F1)
MN10300 Series
Do not set any one. MOT .mot or s off
Port COM1 Baud Rate 115200
Stop Bits 1Bit Byte size 8Bits
(5) Setting for PC
Parity
* The numbers (1) – (5) in the above tables show the number in figure 9-1B-1 (Setup Panel).
Table 12-2C-2
Select CPU
(1)
(2)
(3)
(4)
(5)