manualshive.com logo in svg

Panasonic AJ-D93MC, Service Manual

The Panasonic AJ-D93MC is a high-performance professional camcorder that offers exceptional video recording capabilities. To ensure uninterrupted usage and optimal performance, it is essential to have the Service Manual. Download the comprehensive manual for free from manualshive.com to expertly operate and maintain your valuable Panasonic AJ-D93MC.

Share
Download
background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SERVICE INFORMATION 

CONTENTS 

1.  SERVICING FIXTURES & TOOLS ..........................................................................................INF-1 
2. ALIGNMENT 

TAPE ..................................................................................................................INF-4 

2-1.  VFM3580KM / KL (NTSC) (25M adjustment tape) ......................................................INF-4 
2-2.  VFM3581KM / KL (NTSC) (Manufacturer (LISTA) adjustment tape) ..........................INF-4 
2-3.  VFM3582KM / KL (NTSC) (Manufacturer (X-value) adjustment tape) ........................INF-4 
2-4.  VFM3380KM (NTSC) (50M adjustment tape) .............................................................INF-4 
2-5.  VFM3010EDS / EDL (NTSC) (DV adjustment tape) ...................................................INF-4 
2-6.  VFM3000EDS / EDL (NTSC/PAL) (DV (LISTA) adjustment tape) ..............................INF-5 
2-7.  VFM3680KM / KL (PAL) (25 M adjustment tape) ........................................................INF-5 
2-8.  VFM3681KM / KL (PAL) (Manufacturer (LISTA) adjustment tape) .............................INF-5 
2-9.  VFM3682KM / KL (PAL) (Manufacturer (X-value) adjustment tape) ...........................INF-5 
2-10.  VFM3480KM (PAL) (50M adjustment tape) ................................................................INF-5 
2-11.  VFM3110EDS / EDL (PAL) (DV adjustment tape) ......................................................INF-6 

3.  LIST OF RECOMMENDED MEASURING INSTRUMENTS....................................................INF-6 
4. MAINTENANCE .......................................................................................................................INF-7 

4-1. Maintenance 

Schedule ................................................................................................INF-7 

4-2.  Layout of the Maintenance Parts .................................................................................INF-8 
4-3.  Layout of the Other Parts.............................................................................................INF-8 

5.  MANUAL TAPE EJECT (Emergency Eject) .............................................................................INF-9 
6. Cleaning 

Method ......................................................................................................................INF-10 

6-1.  Cylinder Head Cleaning Method: (Daily) .....................................................................INF-10 
6-2.  Cylinder Lead Cleaning Method: (Weekly) ..................................................................INF-10 
6-3.  A/C Head Cleaning Method: (Weekly).........................................................................INF-10 
6-4.  Pinch Roller and Capstan Shaft Cleaning Method: (Weekly)......................................INF-10 
6-5.  Post Cleaning Method: (Weekly) .................................................................................INF-10 

7.  SOFTWARE VERSION DISPLAY............................................................................................INF-11 

7-1.  SOFTWARE and PLD VERSION are displayed on the VIDEO SUPER OUT   
 

(Monitor TV) and FRONT DISPLAY. ...........................................................................INF-11 

8.  ERROR RATE DISPLAY..........................................................................................................INF-13 
9. DIAG 

MENU 

DISPLAY .............................................................................................................INF-15 

10.  TP & MAIN SIGNAL FOR TAPE PATH CONFIRMATION.......................................................INF-17 
11. INTERNAL SWITCH SETTING ................................................................................................INF-19 
12.  SOFTWARE VERSION UPGRADE METHOD ........................................................................INF-20 

12-1.  Microcomputer (FLASH) / PLD Chart ..........................................................................INF-20 
12-2.  Flash ROM / FPG Software Version Upgrade Procedure ...........................................INF-21 

13. SERVICE MENU ......................................................................................................................INF-32 

13-1.  Service Menu Operation Method.................................................................................INF-32 
13-2. DEFAULT Operation....................................................................................................INF-33 
13-3.  Service Menu Contents ...............................................................................................INF-34 

14. ERROR MESSAGES ...............................................................................................................INF-52 
15.  NODE UNIQUE ID (UID) ..........................................................................................................INF-56 

15-1.  Confirmation of UID Number .......................................................................................INF-56 
15-2. Writing UID...................................................................................................................INF-56 

16.  CIRCUIT BOARD LAYOUT DRAWING ...................................................................................INF-58 

 

Summary of Contents for AJ-D93MC





















































































































































































Reviews:

No comments

Related manuals for AJ-D93MC

DANE-ELEC SO ROAD MOVIE CAR PACK Quick Start Manual preview
SO ROAD MOVIE CAR PACK
Brand: DANE-ELEC Pages: 14
DANE-ELEC SO ROAD MOVIE Datasheet preview
SO ROAD MOVIE
Brand: DANE-ELEC Pages: 2
DANE-ELEC SO WORLD TV - Quick Start Manual preview
SO WORLD TV -
Brand: DANE-ELEC Pages: 16
DANE-ELEC SO G-STREAM - Quick Start Manual preview
SO G-STREAM -
Brand: DANE-ELEC Pages: 16
DANE-ELEC SO SPEAKY - Datasheet preview
SO SPEAKY -
Brand: DANE-ELEC Pages: 2
DANE-ELEC SO XSTREAM FULL HD - Datasheet preview
SO XSTREAM FULL HD -
Brand: DANE-ELEC Pages: 2
Nakamichi 482 Service Manual preview
482
Brand: Nakamichi Pages: 67
Vitek VT-3776 Manual Instruction preview
VT-3776
Brand: Vitek Pages: 12
Meicheng TG-10B Quick Start Manual preview
TG-10B
Brand: Meicheng Pages: 6
MODIX HD-35 User Manual preview
HD-35
Brand: MODIX Pages: 26
Marantz CD4000/K1B Service Manual preview
CD4000/K1B
Brand: Marantz Pages: 28
Ultrak KR4096HN Operation Instructions Manual preview
KR4096HN
Brand: Ultrak Pages: 42
Cowon iAUDIO M5 User Manual preview
iAUDIO M5
Brand: Cowon Pages: 52
TechniSat MultyMedia TS 1 Operating Manual preview
MultyMedia TS 1
Brand: TechniSat Pages: 91
Daewoo DV6T834N Owner'S Manual preview
DV6T834N
Brand: Daewoo Pages: 54
Diamond HD Media Wonder MP700 Quick Installation Manual preview
HD Media Wonder MP700
Brand: Diamond Pages: 32
Grundig LIVANCE GDP 3200 Supplemental Service Manual preview
LIVANCE GDP 3200
Brand: Grundig Pages: 5
IC Audio RAC 02 + Media Player User Manual preview
RAC 02 + Media Player
Brand: IC Audio Pages: 72

Brands by name

Popular brands

Load more brands