Palm Pre Plus, User Manual

Page: 63 / 224

Chapter 4 : Phone 63
1 Do one of the following:
• Before dialing a number you entered in the dial pad, tap Add to
Contacts .
• During a call, tap .
• After a call, from the dial pad, tap . Tap to the right of the
number, and tap Add To Contacts .
2 Tap one of the following:
Add New Contact: Create a new contact for the phone number.
Add To Existing: Tap the contact you want to add the phone number
to.
Use a phone headset
You can connect the headset included with your phone or any 3.5mm
headset (sold separately) for hands-free operation.
WARNING If driving while using a phone is permitted in your area, we
recommend using a headset or hands-free car kit (sold separately). However, be
aware that use of a headset that covers both ears impairs your ability to hear other
sounds. Use of such a headset while operating a motor vehicle or riding a bicycle
may create a serious hazard to you and others, and may be illegal. If you must use
a stereo headset while driving, place a speaker in only one ear. Leave the other ear
free to hear outside noises, and use the headset only if it is legal and you can do so
safely.
Use a wired headset
Your phone works with headsets that have a 3.5mm connector (look for
three colored bands on the plug). When in doubt, ask the third-party
headset manufacturer if the product is compatible with your phone. If you
hear a headset buzz or experience poor microphone performance, your
headset may be incompatible with your phone.
1 Connect the headset. While on a call, the icon changes to .
2 The headset button performs different actions depending on the
headset model and what’s happening on the phone. Press the headset
button once to perform any of the following tasks supported by your
particular headset:
• Answer an incoming call.
• Respond to call waiting.
• Hang up a single active call or all calls on a conference call if there is
no extracted call.
• Switch between calls if there is one active call and one call on hold.
3 If you want to stop using the headset, do any of the following:
• To switch from the headset to your phone’s speakerphone: Tap
and tap Speaker .
• To switch from the wired headset to a previously paired Bluetooth ®
hands-free device: Tap and tap the device name.
• To use your phone without the headset: Disconnect the headset.
Set up and use a Bluetooth
®
hands-free device
Your phone is compatible with many headsets and car kits (sold separately)
enabled with Bluetooth
® wireless technology version 2.1, with EDR and
stereo (with AVRCP media controls).