180
Chapter 11 : Troubleshooting
10
Position the back cover over the phone and gently press the two clasps
(a) located at the top corners. Then press the two clasps (b) halfway
down either side of the phone.
11
Slide out the keyboard (see
Slide out the keyboard
), and then press the
two clasps (c) at the bottom corners.
12
Press and hold
power
on the upper-right corner of your phone
until you see the Palm logo on the screen (approximately five seconds).
Then wait until your phone completes startup.
I inserted or removed the SIM card without taking out the
battery—now I can’t connect to the network.
If you inserted or removed the SIM card before you removed the battery,
your phone cannot connect to the network. To restore the network
connection, do the following:
1
Remove the battery (see
I need to replace the battery
, steps 1–8, for
instructions).
2
Remove the SIM card.
3
Reinsert the SIM card.
4
Replace the battery and the back cover (see
I need to replace the
battery
, steps 9–12, for instructions).
5
Press and hold the
power
button on the upper-right corner of your
phone until you see a logo on the screen (approximately five seconds).
Then wait until your phone completes startup.
6
If Airplane Mode appears in the upper-left corner of the screen, open
the
connection menu
and tap
Turn off Airplane Mode
.
TIP
If your phone does not turn on after you insert the battery and press and hold
power
, you may need to charge the battery (see
Charge the battery
).
Summary of Contents for Pre Plus
