manualshive.com logo in svg

Palm P80860US - Tungsten T2 - OS 5.2.1 144 MHz, Handbook

Introducing the Palm P80860US Tungsten T2, a powerful handheld device running on OS 5.2.1 with a speedy 144 MHz processor. Enhance your productivity with this sleek gadget. To get started, don't forget to download the comprehensive "Read This First Manual" for free from our website.

Share
Download
background image

Chapter 18

Using Voice Memo

314

7.

Tap the hour and minute columns to select the time you want the alarm to occur.

8.

(Optional) Tap the Auto-play check box to automatically play the voice memo 
when the alarm goes off.

9.

Tap OK.

10.

When the alarm goes off and the reminder message appears onscreen, do one of 
the following:

– Tap OK to permanently dismiss the reminder and return to the current 

screen.

– Tap Snooze to dismiss the reminder and return to the current screen. An 

attention indicator blinks in the upper-left corner of the screen to remind you 
of the pending alarm, and the reminder message appears again in five 
minutes. When the reminder message reappears, the current time appears in 
the Reminder bar and the voice memo title appears on the screen. If you did 
not title the voice memo, the time the voice memo was created appears on 
the screen.

– Tap Go To to open Voice Memo. Voice Memo opens and displays the voice 

memo associated with the alarm. Wait a moment for the voice memo to begin 
playback, or tap Play.

Tap here to 
select minutes

Tap here to 
select hour

Summary of Contents for P80860US - Tungsten T2 - OS 5.2.1 144 MHz























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for P80860US - Tungsten T2 - OS 5.2.1 144 MHz

Franklin SPELLMASTER SMQ-100 User Manual preview
SPELLMASTER SMQ-100
Brand: Franklin Pages: 16
Franklin Medical Book System MBS-1770 User Manual preview
Medical Book System MBS-1770
Brand: Franklin Pages: 14
Franklin SMM-106 User Manual preview
SMM-106
Brand: Franklin Pages: 22
Brother PR-620 Operation Manual preview
PR-620
Brand: Brother Pages: 237
IBM 8602-20X Supplementary Manual preview
8602-20X
Brand: IBM Pages: 106
IBM c505 - WorkPad Handbook preview
c505 - WorkPad
Brand: IBM Pages: 292

Brands by name

Popular brands

Load more brands