Palm P80860US - Tungsten T2 - OS 5.2.1 144 MHz Handbook Download Page 296

Page: 296 / 502

Chapter 17

Using Palm™ VersaMail™ Personal E-mail Software

282

To turn a filter on or off:

Tap the Menu icon

Select Options, and then select Filters.

The Filters dialog box appears with the filters you created.

Tap the pick list in the upper-left corner, and select Connected or Synchronize.

– Connected applies a filter to messages downloaded to your handheld over a

modem or network connection.

– Synchronize applies a filter to messages downloaded to your handheld

during a HotSync operation.

Tap the filter check boxes to select the filters you want to use for subsequent
e-mail transactions.

IMPORTANT

If you deselect a filter listed under Connected, be sure that the filter

is deselected also under Synchronize.

Tap OK.

Filters with a checkmark are
turned on

Summary of Contents for P80860US - Tungsten T2 - OS 5.2.1 144 MHz























































































































































































































































































































































































































































































































Search results

Summary of Contents for P80860US - Tungsten T2 - OS 5.2.1 144 MHz

Reviews:

Related manuals for P80860US - Tungsten T2 - OS 5.2.1 144 MHz

Brands by name

Popular brands

Palm P80860US - Tungsten T2 - OS 5.2.1 144 MHz, Handbook

Search results

Summary of Contents for P80860US - Tungsten T2 - OS 5.2.1 144 MHz

Reviews:

Related manuals for P80860US - Tungsten T2 - OS 5.2.1 144 MHz

Brands by name

Popular brands