Digital Video Recorder
53
Recording information about video images currently displayed on the screen displays on the recording status
bar. A grey vertical line indicates the current search position. To search specific video, move the vertical line
by using the
Left
or
Right
arrow buttons on the front panel or by clicking the mouse on the desired segment.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is possible
for the DVR to have more than one video stream in the same time range. In this case, the overlapping time
range in the record table will be separated by a yellow vertical line.
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default)
displays combined recording information of all camera channels currently displayed on the screen. In the
Standard view mode, selecting the icon located at the bottom switches to the Expanded view mode. The
Expanded view displays the recording information of each camera channel currently displayed on the screen.
Selecting the icon in the Standard view mode switches to the Compact view mode which displays only the
toolbar. Selecting the icon in the Compact view mode switches to the Standard view mode, and selecting
the icon in the Expanded view mode switches to the Standard view mode.
Selecting or located at the bottom zooms the record table. Selecting displays eight hours (1-minute
based), and selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that
are not shown in the current record table screen, select the arrows located at the end of the times by using
the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the
recording status bar displays recording information in the following priority order: Panic
Pre-Event
Event
Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for
Pre-Event, Purple for Event, and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen.
Days with recorded video display on the calendar with white
numbers. You can select the days with recorded video by using
the arrow buttons on the front panel. Once you have selected a
day, pressing the button displays the first recorded image of the
selected date on the screen. Once you have selected the date you
want to search, review the surrounding video by using the
playback controls located at the bottom. Refer to the
Playing
Recorded Video
section of this chapter for information regarding
playback controls.
Selecting located at the bottom displays the Search menu.
Go To:
Displays the first or last recorded image, or searches by date and time (see
the previous
Searching Video – Go To
section of this chapter for more details).
Clip-Copy:
Copies a video segment and saves it (see the following
Clip Copy
section
for more details).
Zoom:
Zooms the current playback image.
Enable De-Interlace:
Turns the de-interlace filter on.
Slow Play:
Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
Selecting in the top-left corner exits the Record Table Search screen.
