Digital Video Recorder
23
Motion Event Setup (EVENT
Motion Tab)
Figure 15
─
Motion screen.
Your DVR has built-in video motion detection. Video motion detection can be turned On or Off for each
camera.
Highlighting the box under the
Sensitivity
heading and pressing the button allows you to adjust the DVR’s
sensitivity to motion for Daytime and Nighttime independently.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box
under the
Zone
heading, and press the button. The
Motion Detection Zone
screen displays.
Press the button to display the menu screen. The menu on the setup screen has the following functions:
There are five settings with
1
being the least sensitive and
5
being the most
sensitive.
The
Motion Detection Zone
screen is laid over the video for
the selected camera. You can set up motion detection zones by
selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in
groups of 8 individual block groups. A block group is positioned
within the image area using the Up and Down arrow buttons,
and individual blocks within the block groups are selected or
cleared using the camera buttons.
Select
─
Activates highlighted blocks to detect motion.
Clear
─
Deactivates highlighted blocks so that they will not detect motion.
Reverse
─
Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All
─
Activates all blocks to detect motion.
Clear All
─
Deactivates all blocks so that they will not detect motion.
Reverse All
─
Activates inactive blocks and deactivates active blocks.
Zone View
─
Displays any detected motion within the zone in red.
OK
─
Accepts changes and closes Zone setup.
Cancel
─
Exits Zone setup without saving changes.