User’s Manual
16
Highlight the Format box beside
Time
and press the button. Select from the three available time formats
and press the button to save your selected format.
NOTE: The clock will not start running until you have highlighted
Save
and pressed the
button.
Highlight the box beside
Time Zone
and press the button. Select your time zone from the list and press
the button.
Highlight
Enable Daylight Saving Time
and press the button. Pressing the button toggles between
On
and
Off
.
Highlight
Time Sync…
and press the button. You can set up time synchronization between the DVR
and standard time servers that are available in most time zones and countries, or between the DVR and
another DVR.
Highlight the box beside
Interval
and press the button. Set the time interval for synchronization from
30 minutes to 1 day at various time intervals.
Last Sync-Time
displays the last time the DVR was synchronized with the time server.
Highlight
Run as Server
and press the button. Pressing the button toggles between
On
and
Off
.
When it is
On
, the DVR you are setting up will run as a time server.
Highlight
Holiday…
and press the button. You can set up holidays by highlighting
+
and pressing the
button. The current date appears.
After you are finished with the Date/Time Screen, you can highlight
Save
and press the button to save
the changes and exit the screen. If you do not wish to save the changes, highlight
Cancel
and press the
button to exit the screen.
Highlight the box beside
Automatic Sync.
and press the
button. This toggles between
On
and
Off
.
Highlight the box beside
Time Server
and press the
button.
A virtual keyboard appears that you can use to
enter the IP address or domain name of the time server.
NOTE: You can use the domain name instead of IP
address if you already set up the DNS Server when
setting up the Network.
Highlight the month and day and change them by using the
Up
and
Down
arrow
buttons. Press the button to add the date. Dates can be deleted by highlighting
the beside the date and pressing the button.
NOTE: Holidays that do not fall on the same date each year should be
updated once the current year’s holiday has passed.
