User’s Manual
14
To add a User, highlight the
+ User…
box and press the button. A virtual keyboard appears allowing
you to enter the User Name.
NOTE: Up to five Users can be registered to the Operator group.
CAUTION: Write down the new password and save it in a secure place. If the password
is forgotten, the unit must be reset using the
Factory Reset Button
and all data settings will
be lost.
Highlighting a User Name and pressing the button allows you to add or change the password assigned
to that user.
The column can be used to delete a User Name If the is grayed out, that User cannot be deleted. Highlight
the and press the button. You will be asked to confirm that you want to delete the User. To delete the
User currently logged into the DVR on a local system or a PC running RAS, log the user out of the system
first and then delete the user.
Highlighting an
Operator
Group Name and pressing the button allows you to change the authority levels
assigned to the group.
The authority levels that can be turned On and Off are:
Shutdown
─
The user can shut the system down on a local system.
Upgrade
─
The user can upgrade the software on a local system or a PC running RAS.
System Time Change
─
The user can change the system date and time on a local system or a PC running RAS.
Data Clear
─
The user can clear all video data or format disks on a local system or a PC running RAS.
The
+/-
column is used to collapse and expand user groups. If there is a +
or – in this column, it indicates the item is a Group Name. If there is a – in
front of the Group Name, it indicates that the group has been “expanded” and
all of the User Names within that group are displayed below the Group Name.
If there is a + in front of the Group Name, it indicates that the group has been
“collapsed” and all of the User Names within that group are hidden. To
collapse or expand a group, highlight the
+/-
column in front of the desired
group and press the button.
Enter the name and assign password. You can use camera buttons 1 to 9
on either the front panel to assign the password. The password can be up
to 8 digits. You will be asked to confirm the password.
NOTE: In addition to using the front panel buttons, you can use the
virtual keyboard to assign the password. To display the virtual
keyboard click the
button using the mouse (not supplied).
Highlighting the
Authority
box and pressing the button will toggle
between all authority levels being turned On and Off. Highlighting the
individual authority level boxes and pressing the button will toggle
between that authority level being turned On and Off.