User’s Manual
12
System Menu
System Setup (SYSTEM
System Tab)
Figure 7
─
System screen.
In the
System
screen, you can assign a System ID number, select the language the screens are displayed in,
display software version number, upgrade the software, show the System Log, register users, and shut the
system down.
Highlight the box beside
System ID
and press the button. Change the number by highlighting it and
using the
Up
and
Down
arrow buttons to increase and decrease the number from 0 to 99.
NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through
the RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485
network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as
they are not part of an RS485 network. If this is the case, all will be controlled at the same time when
using the infrared remote control.
Highlight the box beside
Language
and press button. A drop-down menu displays the available languages.
Highlight the desired language and press the button.
The box beside
Version
displays the software version of the DVR.
To upgrade the software, connect a USB device containing the upgrade package file to the DVR. Highlight
Upgrade…
and press the button. The
Upgrade
screen appears.
Use the arrow keys to highlight the character you want in the name or title
and press the button. That character appears in the title bar and the cursor
moves to the next position. Pressing toggles between the upper and lower
case keyboards, backspaces, and deletes entered characters. You can
use up to 31 characters including spaces in your title.
Special characters can be created using ^ and a capital letter; e.g., ^J for NL
(New Line), ^M for CR (Carriage Return). Special characters are commonly
used by text input devices and will be useful when performing Text-In Searches.
