Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 9
Rev: V3
Date: 032222
®
From the HEIGH10 kit, locate the
GPS antenna and metal mounting
plate.
Step 1
Stick the metal plate to the top of the
right side air vent. Excess cable can
be secured and stowed in the space
to the right of the vent.
Connect the BAA22 antenna adapter
from the SRK-CHR16H kit to the
white antenna plug in the vehicle.
Step 2
Step 3
Section 3.1: Dodge Challenger In-Vehicle Harness Connections and Preparation (cont.)
Part Three: GPS Antenna and AM/FM Antenna Adapter (BAA22)
The chime speaker can be mounted
in various locations. This installation
uses a factory stud and bolt to the left
of the steering column since that area
is accessible.
Step 1
Remove the speaker from the
mounting bracket. Enlarge the
mounting hole to fit over the factory
stud. Reinstall and tighten the bolt.
Remount the speaker on the bracket.
Feed the 2-pin speaker plug up to the
radio opening. Securing wiring and
excess cable with zip ties.
Step 2
Step 3
Part Four: Optional Chime Speaker Installation
Note: Installation of the chime speaker is only required in vehicles equipped with Safety Group (parking sensors).
Dodge Challenger continue to Section: 3 on Page 26