Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 4
Rev: V3
Date: 032222
®
Section 1.1: Dodge Challenger Disassembly (cont.)
Part Two: Access Driver and Passenger CAN Junction Blocks (STAR Connectors)
Using a trim tool, remove the drivers
side dashboard end panel.
Step 1
Remove the two Phillips screws
securing the lower dash knee panel.
Step 2
The passenger side CAN junction
block is located below the glove box.
Step 4
Remove the three push fasteners
holding the fabric closeout panel
below the glove box. Temporarily let it
lay on the floor board.
Looking up under the glove box,
locate the green CAN junction block
with white plugs.
Step 5
Step 6
Pull the lower knee panel outward to
release the retaining clips along the
top allowing access to the white CAN
junction block below the steering
column
Step 3
