Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 17
Rev: V3
Date: 032222
®
The chime speaker can be mounted
in various locations. This installation
uses a factory stud and bolt to the left
of the steering column since that area
is accessible.
Step 1
Remove the speaker from the
mounting bracket. Enlarge the
mounting hole to fit over the factory
stud. Reinstall and tighten the bolt.
Remount the speaker on the bracket.
Feed the 2-pin speaker plug up to the
radio opening. Securing wiring and
excess cable with zip ties.
Step 2
Step 3
Part Four: Optional Chime Speaker Installation
Note: Installation of the chime speaker is only required in vehicles equipped with Safety Group (parking sensors).
Section 2.2: Dodge Charger In-Vehicle Harness Connections and Preparation (cont.)
Dodge Charger continue to Section: 3 on Page 26
