Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 26
Rev: V3
Date: 032222
®
Step 1
Step 2
Step 3
Section 3: Interface and Main Harness Connections (ALL VEHICLES)
Connect the three connectors
from the SRK-CHR16-HAR Main
Harness to the indicated ports on
the CH4A-SRK module.
Referencing the sticker on the
back, connect the fourth connector
to the appropriate port.
Amplified
if
the vehicle has a factory amplifier,
Non-Amplified
for base audio.
Connect one end of the 6” Data
Harness (10P-2-10P-6-HAR) to the
CH4A-SRK Expansion Port and
the other end to either port on the
PAC-LINK (PL-1)
1
2
3
4
Step 4
Step 5
Step 6
From the HEIGH10 wire
harnesses, connect the 3-pin
PAC-Link lead on the 10-pin Multi
Camera Harness to the PL-1.
Connect the pink SPEED SEN lead
on the Main Harness to the pink
SPEED SEN lead on the HEIGH10
10-pin Multi Camera Harness.
Zip tie the PAC-Link (PL-1) to the
main harness.
Step 7
Connect the male and female ends
of the Light Green leads together.
Connect the RPA-VA1 to the 6-pin
REVERSE CAM VA1 plug.
HEIGH10 10-PIN
MULTI CAMERA
HARNESS
