Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 7
Rev: V3
Date: 032222
®
Temporarily position the console back
in the vehicle.
(The console will be fully reassembled
and secured after radio installation is
finished and tested).
Once all the cable is pulled through,
align and snap the replacement hub
into place.
Step 1
Step 4
Route the four media cables up from
the lower dash into the radio opening
area.
Flip the console over on a soft
surface. Bundle and route the cables
towards the front the console.
Secure cables to the factory wire
harness that is running along the
bottom of the console. Secure with
zip ties.
Step 2
Step 5
Step 6
Section 2.1: Dodge Challenger Media Hub Installation (cont.)
Section 3.1: Dodge Challenger In-Vehicle Harness Connections and Preparation
Part One: Routing Media Hub Cables
