Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 23
Rev: V3
Date: 032222
®
Temporarily position the console
back in the vehicle. (The console
will be fully and secured after radio
installation is finished and tested).
Step 4
Route the four media cables up from
the lower dash into the radio opening
area.
Step 5
Section 2.3: Chrysler 300 In-Vehicle Harness Connections and Preparation
Part One: Routing Media Hub Cables
Starting at the radio opening, route
the twisted pink wires with green
connectors on the MQS4PT36V2
harness to the drivers side CAN
junction block.
Step 1
On the drivers side, plug the green
male plug on the MQS4PT36V2
harness into one of the open ports on
the CAN junction block. The female
plug will not be used.
If there are no open ports, see note
on next page.
Route the twisted white striped
wires with white connectors on the
MQS4PT36V2 harness from the radio
opening to the passenger side CAN
junction block.
Step 2
Step 3
Part Two: Driver and Passenger Side CAN Connections (
MQS4PT36V2)
