Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 3
Rev: V3
Date: 032222
®
Section 1.1: Dodge Challenger Disassembly
Using a plastic trim tool, release all
the retaining clips holding the trim
panel around the instrument cluster
and radio display.
NOTE: If this dash panel has not
been removed before, it may require
extra force to remove.
Step 1
Lower the steering column and
remove the panel by pulling outward
far enough that the air vents are clear
of the sub-dash.
NOTE: During removal, air vents may
detach from the panel; they can be
reattached to the back of the panel.
Step 2
Remove the four screws securing the
factory radio display and pull radio
out to access the connectors on the
back.
Disconnect all cables and connectors
from the back of the radio and
remove radio.
Step 3
Step 4
Part One: Radio Removal
Dodge Challenger
Start Section 1.1
Page: 3
Dodge Charger
Start Section 1.2
Page: 10
Chrysler 300
Start Section 1.3
Page: 18
This installation guide covers three vehicles. Start at the appropriate section listed below:
