Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 35
Rev: V3
Date: 032222
®
Section 6: Radio Unit Installation (ALL VEHICLES) (cont.)
Part Three: Initial Boot Up and Function Tests
Part Four: Attaching The Display Screen
Step 3
Step 4
Reconnect the two display cables
on the back of the HEIGH10
display screen.
Align and seat the four shoulder
bolts on the back of the display to
the four keyholes on the mounting
bucket as shown at right.
(Display cables removed for illustration)
Once all four shoulder bolts are
seated, slide the display to the
left to lock the shoulder bolts in
the key hole.
Before turning on the ignition, close all the doors and lock the vehicle with the key fob. Wait ten minutes and
then unlock and start the vehicle. The initial boot up may take up to 30 seconds before the display is active.
Do not press the power button or turn off the vehicle during this time. Once powered up, refer to the included
SRK-CHR15H Installer Set-Up Guide for access to the Installer Settings.
Function test all features, including volume, fade, balance, steering wheel controls, reverse camera,
Bluetooth, USB, AUX and HDMI ports, AM/FM reception, Apple CarPlay and Android Auto.
NOTE: Only one of the two USB ports on the media hub will allow Apple CarPlay and Android Auto operation.
Check Vehicle Info and Climate Control sources. Refer to Troubleshooting section on next page if not present.
Check operation of vehicle’s factory radio controls (Volume/Tune knobs, Mute, Power).
If the HEIGH10 external microphone was not installed, the default microphone setting of External must be changed to
Internal by accessing the Phone Settings (
Main Menu>Phone>Settings>Microphone
).
!
Step 1
Challenger/Charger:
Unplug the display cables, if still
attached from testing.
Chrysler 300:
Proceed to Step 4
Step 2
Challenger/Charger:
Lower the steering column and
reinstall the instrument cluster /
radio trim panel.
