Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 11
Rev: V3
Date: 032222
®
Section 1.1: Dodge Charger Disassembly (cont.)
Part Two: Access Driver and Passenger CAN Junction Blocks (STAR Connectors)
Using a trim tool, remove the drivers
side dash end panel.
Step 1
Remove the two Phillips screws
securing the side of the lower dash
knee panel.
Pull the lower knee panel outward
to release the retaining clips along
the top allowing access to the
CAN junction block attached to the
backside of the panel.
Step 2
Step 3
The passenger side CAN junction
block is located below the glove box.
Step 4
Remove the three push fasteners
holding the fabric closeout panel
below the glove box. Temporarily let it
lay on the floor board.
Looking up under the glove box,
locate the green CAN junction block
with white plugs.
Step 5
Step 6
