Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 16
Rev: V3
Date: 032222
®
Step 4
On the passenger side, plug the
white male plug on the MQS4PT36V2
harness into one of the open ports on
the CAN junction block. The female
plug will not be used
NOTE
If there are no open ports on
either junction block, unplug one
factory male connectors and insert
it into the female connector on
the MQS4PT36V2 harness, then
insert the male connector on the
MQS4PT36V2 harness into the now
empty port on the CAN junction block.
Section 3.2: Dodge Charger In-Vehicle Harness Connections and Preparation (cont.)
Part Two: Driver and Passenger Side CAN Connections (
MQS4PT36V2) (cont.)
From the HEIGH10 kit, locate the
GPS antenna and metal mounting
plate.
Step 1
Stick the metal plate to the top of the
right side air vent. Excess cable can
be secured and stowed in the space
to the right of the vent.
Connect the BAA22 antenna adapter
from the SRK-CHR15H kit to the
white antenna plug in the vehicle.
Step 2
Step 3
Part Three: GPS Antenna and AM/FM Antenna Adapter (BAA22)
