Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 8
Rev: V3
Date: 032222
®
Step 4
On the passenger side, plug the
white male plug on the MQS4PT36V2
harness into one of the open ports on
the CAN junction block. The female
plug will not be used
NOTE
If there are no open ports on
either junction block, unplug one
factory male connectors and insert
it into the female connector on
the MQS4PT36V2 harness, then
insert the male connector on the
MQS4PT36V2 harness into the now
empty port on the CAN junction block.
Starting at the radio opening, route
the twisted pink wires with green
connectors on the MQS4PT36V2
harness to the drivers side CAN
junction block.
Step 1
On the drivers side, plug the green
male plug on the MQS4PT36V2
harness into one of the open ports on
the CAN junction block. The female
plug will not be used.
If there are no open ports, see note
below.
Route the twisted white striped
wires with white connectors on
the MQS4PT36V2 harness to the
passenger side CAN junction block.
Step 2
Step 3
Section 3.1: Dodge Challenger In-Vehicle Harness Connections and Preparation (cont.)
Part Two: Driver and Passenger Side CAN Connections (
MQS4PT36V2 Harness)
