Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 6
Rev: V3
Date: 032222
®
Section 1.1: Dodge Challenger Disassembly (cont.)
Compress the four retaining tabs
on the hub to release the assembly
from the console. Disconnect the
connectors from the back of the
factory USB hub and remove.
Step 1
Referencing the front cover, install
the four cable ends into the back
section of the USBHUB-CH1B-
RCA-48 replacement hub. Align and
snap both sections together.
Feed the other end of the four media
cables through the opening on the
inside of the console storage area.
Step 2
Step 3
Part Three: Center Console Removal (cont.)
Remove the two bolts and position
the manual park release aside.
Step 7
On both sides of the console, remove
the bolt covers and the bolts at the
rear of the console.
Step 8
Slide the floor console rearward and
remove.
Step 9
Section 2.1: Dodge Challenger Media Hub Installation
