Overland Data DLT LibraryXpress Series, Service Manual

Page: 70 / 140

62 Chapter 3 - Operation
1. At the Default Screen, press the
Ente
r button to enter the Menu Mode. The Main
Menu is displayed.
2. At the Main Menu, press the button four times until the in the display is next
to ‘Show History Menu.’
3. Press the
Enter
button to select the submenu.
4. At the Show History Submenu, press the button once so that the in the display
is next to ‘Error History.’
5. Press the
Enter
button to select the function. A circular list of 4-line error reports is
displayed in the format shown in Figure 3-23.
Figure 3-23 Error History Screen
6. Using the and buttons, scroll the list to display the error history of the module.
Loading and Unloading Tapes
The Load/Unload menus enable you to specify a source and a destination for a cartridge
movement. As a result, you use exactly the same procedure to load and unload. To load or
unload a tape from the front panel of the module, use the Load/Unload menus as follows.
Figure 3-24 Default Screen
A default screen is shown in Figure 3-24. From the Default Screen, enter the Menu Mode by
pressing the
Enter
button. The Main Menu shown in Figure 3-25 appears.
Figure 3-25 Main Menu
Fault Code: XXXX
Error Description
DD/MMM/YYYY HH:MM:SS
Entry NNNN Of NNNN
READY
Modules 123456
__
1
_ _ _ _ _ _ _ _
10
11
_ _ _ _
16
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu