Overland Data DLT LibraryXpress Series, Service Manual

Page: 43 / 140

Chapter 2 - Installation 35
Figure 2-16 Base Module Default Screen
2. Press the
Enter
button to display the Main Menu, shown in Figure 2-17.
Figure 2-17 Base Module Main Menu
3. Press the button three times to select the Configure Menu, then press the
Enter
button.
The screen shown in Figure 2-18 appears.
Figure 2-18 Configure Submenu
4. Press the button repeatedly to select Set Special Configuration, as shown in Figure 2-
19.
Set Serial Number
Set Unload Mode
Set Negotiation
Set Special Config
Figure 2-19 Configure Submenu, Scrolled
5. Press the
Enter
button. The screen shown in Figure 2-20 appears.
DLT1 Idle
DLT2 Idle
Loader Idle
1
_ _ _ _ _ _ _ _
10
L
oad/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Set Data Format
Set SCSI
Set Element Base
Set Identification