Overland Data DLT LibraryXpress Series, Service Manual

Page: 50 / 140

42 Chapter 2 - Installation
Table 2-1 summarizes the configuration settings for the DLT LibraryXpress System. The
default settings are shown in the fourth column. other possible settings are shown in the third
column.
Note: The options described in this table represent the version of the firmware in use when
this manual was written. If the displays on your control panel differ from those described here,
you may find an up-to-date listing of configuration options on the Overland Data web site
listed on page ii of this manual.
Table 2-1 LibraryXpress Configuration Options
Option Settings Default
Data Format
Density: THZ01, THZ02,
DLT2000, DLT2000XT,
DLT4000, DLT7000, Auto
Selection
Compression: Enabled,
Disabled (Enabled at 10.0
only)
Auto
Disabled
SCSI
Lib Bus Parity: Enable,
Disable
Lib Bus ID: (SCSI ID)
DLT1 Bus ID: (SCSI ID)
DLTn Bus ID: (SCSI ID)
Enabled
6
Element Base
Transport: NNNN (hex)
Storage: NNNN (hex)
Transfer: NNNN (hex)
Import/Export: NNNN (hex)
0000
0001
00F0
00E0
Identification
Vendor ID: OVERLAND
EXABYTE, DEC, Quantum,
Vendor Unique
Product ID: LXB, LXG, LXS
EXB-210, EXB-440, EXB-
480, TZ Media Changer,
TL900, Vendor Unique
OVERLAND
LXB
Date DD, MMM, YYYY Current date
Time HH, MM Current Time
Baud Rate [Data rate of flash conn.] 38400
Serial Number NXNNNNNNN 999999999
Unload Mode Implicit, Explicit Implicit
Negotiation
Negotiation Mode: Do Not
Initiate, Initiate
Transfer Rate: 10 MB/sec, 5
MB/sec, Asynchronous
Do Not Initiate
10 MB/sec
Mail Slot
Mail Slot Emul: Disabled,
Enable Module 1, . . .Enable
Module
n
Mail Slot Count: 1 through n
Disabled