68 |
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
(01.2012) OM_BA_ORBIMAT_CA_01_EN
SERVICE AND TROUBLESHOOTING
ORBIMAT CA
| Operating instructions
44
No weld head
connected!
Procedure started, no weld head connected to the machine.
Weld head is connected?
•
Weld head not encoded
•
Voltage supply to weld head defective. The operating buttons in the weld head are
not working.
X
Contact ORBIMATIC service.
45
Incorrect weld head
connected!
The currently connected weld head is not the same as the weld head in the started
procedure.
X
Select connected weld head in the procedure.
– or –
X
Connect the weld head selected in the procedure to the machine.
Are the weld head models identical, but the message appears anyway?
X
Contact ORBIMATIC service.
46
The procedure
contains parameters
which lie outside the
limit values for the
selected weld head!
Weld head changed in procedure. Weld head does not match the one in the parameters.
The weld head list of the machine contains the parameters of the weld heads which
can be connected to the machine, e.g. the maximum rotation of the rotor, the
maximum pipe diameter to be welded and the maximum permissible current.
X
Adjust parameters of the program to the selected weld head.
9.4
Status LED indicators
The back of the machine is equipped with five LED rows (A through E) with eight LEDs each.
The status of all important internal signals of the unit is signaled by the LEDs. The LED indicators work independently of
the control computer of the machine.
Row A:
Red LEDs (row A) are lit up: Internal control fuses defective.
Row B:
Green LEDs (row B) are lit up: Internal control voltages for PC, motor, valves etc. are active.
For OM 165 CA and OM 300 CA units: Indicator B2 – printer power supply unit. Indicator lights up if the internal printer
was switched on (by a print command).
Yellow LEDs:
Indicate various functions. Switched on or off depending on the operating condition of the system and the function.
Summary of Contents for ORBIMAT 165 CA
Page 78: ...orbitalum tools gmbh Notizen Notes ...
Page 79: ......