(01.2012) OM_BA_ORBIMAT_CA_01_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
| 7
ORBIMAT CA
| Operating instructions
OWNER INFORMATION AND SAFET Y PRECAUTIONS
2.3
Basic safety precautions
All products produced and sold by Orbitalum Tools GmbH are built for safe use using state-of-the-art technology.
Remaining risks are described in the following operating instructions. Using the equipment in a way other than as
described in the operating instructions can lead to serious personal injury and damage to property.
•
Heed and comply with safety precautions.
•
Store all documentation near the machine.
•
Heed country-specific regulations, accident-prevention regulations, standards and guidelines.
•
Use the machine only in proper operating order. Heed information on maintenance (see Sec. 10.1, Page 72).
•
Report deviations in operating behavior of the machine to the person in charge immediately.
•
Use only the dimensions and materials listed in these instructions. Other materials may only be used after
consulting with Orbitalum Tools customer service.
•
Use only genuine tools, spare parts, operating materials and accessories from Orbitalum Tools.
•
Repair and maintenance work on the electrical equipment may only be carried out by a qualified electrician.
•
Switch the machine off, let it stop running and unplug the power plug after using it, before transporting it, before
changing tools and before carrying out cleaning, adjustment and repair work.
•
Do not carry machine by the hose assembly. Protect machine cabling from heat, oil and sharp edges.
•
Do not reach into the tools during operation.
•
Ensure that the workpiece is clamped properly.
•
Only switch on the machine if a pipe is clamped.
•
When working with the machine, wear safety shoes as per EN ISO 20345 (at least S1).
•
When working with the machine, wear safety shoes in accordance with EN ISO 20345 (at leastS1)
•
In extreme usage conditions, conductive dust can settle inside the machine.
Z
Have a professional electrician install an SPE-PRCD or ground-fault circuit (30 mA) between the mains
network and the machine.
The suggestions for "personal safety equipment" apply
exclusively and specifically for the product described.
Other requirements arising from ambient conditions at the
location of use, other products or the link with other products
are not taken into account.
These suggestions do not relieve the owner (employer) of his/
her legal duties regarding work-safety and health protection of
employees.
WARNING
Danger of system (Orbicar welding carriage, gas bottle, welding power source, cooling
unit) tipping over from the application of force from outside.
Various injuries and damage to property!
X
Set up machine so that it also stands securely against external influences.
X
Keep moving masses at least 1 meter away from the machine.
DANGER
Dangers of operation by multiple persons.
Various injuries and damage to property!
X
Have one person operate the machine and weld head.
Summary of Contents for ORBIMAT 165 CA
Page 78: ...orbitalum tools gmbh Notizen Notes ...
Page 79: ......