manualshive.com logo in svg

Orbitalum ORBIMAT 165 CA, Operating Instructions Manual

Share
Download
Orbitalum ORBIMAT 165 CA Operating Instructions Manual Download Page 15

(01.2012) OM_BA_ORBIMAT_CA_01_EN 

 orbitalum tools

 GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0

    |    15

ORBIMAT CA

  |  Operating instructions 

 

CHARACTERISTICS AND RANGE OF APPLICATIONS

4.  CHARACTERISTICS AND RANGE OF APPLICATIONS

4.1 

Characteristics

Operating concept, functions and equipment of the ORBIMAT CA series (basic configuration):

• 

ORBIMATIC auto programming with programming aid via entry of pipe diameter, wall thickness,
material and weld gas.

• 

ORBIMAT CA models: FLOW FORCE for reducing the gas pre purge time with closed weld heads
(standard configuration).

• 

BUP control function with monitored, position-dependent pipe internal-pressure control (optional).

• 

Operation by multifunctional rotary knob.

• 

DC direct current welding.

• 

Control option for cold wire supply.

• 

10.5" swiveling monitor.

• 

Storage capacity for over 5,000 procedures.
Procedure management through the creation of folder structures.

• 

Welding data logging and printing of actual values.

• 

Multicard reader for data transfer to external PC.

• 

Memory expansion and data exchange possible via CompactFlash card (CF), SD, MMC, SM, Sony Memory Stick.

• 

PC Offline software (optional) with conversion option for data logs to PDF and Excel files.

• 

Service functions via PSS (Pro Service System):

        – Function checking even without opening the system.
        – Maintenance and exchange of parts via systematic component layout.

• 

Current and motor slope setting between the individual sectors.

• 

Monitoring of cooling water and weld gas.

• 

Programming of up to 99 sectors possible.

• 

VGA port.

• 

Built-in printer.

Summary of Contents for ORBIMAT 165 CA









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands